Inferring erosional resistance of bedrock units in the east Tennessee mountains from digital elevation data     

Hugh H. Mills   《Geomorphology》2003,55(1-4):263

Measures of local relief, regional relief, and slope were calculated from digital elevation models (DEMs) for 50 bedrock units in the Ridge and Valley and Blue Ridge provinces of Tennessee. Each of these measures was normalized and the three were then averaged to produce the erosional resistance index (ERI). Bedrock units with higher ERI values include coarse clastics, intermediate clastics, and metaplutonics. Units with lower values include shales, limestones, limestones plus dolostones, and carbonates plus fine clastics. Dolostones tend to have intermediate values. The calculated ERI values were compared with subjective ratings by a geologist with decades of field experience in east Tennessee. Generally, the agreement between the two ratings was good, the most glaring exception being several shales with improbably high ERI values. These turned out to be thin units cropping out beneath very hard sandstones, allowing them to stand higher and steeper than would otherwise be possible. A systematic method for detecting such erroneously high ERI values is suggested. Inspection of a drainage map superimposed on the geology map shows that in a given area, streams tend to flow on rock units with the lowest ERI values. In addition, statistical analysis shows that bedrock units with the lowest ERI values are, on average, almost three times closer to the nearest stream and six times as likely to have streams flowing on them than are units with highest values. Further, the effect of ERI on stream location is strongest for streams with drainage areas between 1 and 30 km². Thus, small streams appear to be subject to greater lithologic control than are larger streams.  相似文献   

滇中震旦系碳酸盐岩破碎地层的钻探护孔新技术   总被引：1，自引：1，他引：1  

毛毓坤 《云南地质》2003,22(2):206-210

破碎地层中钻探，采用有效的护孔技术是避免孔内事故发生的重要手段，同时也是保证完成钻探各项技术经济指标的先决条件。本文阐述了在具代表性的磷矿破碎地层中钻进所遇到的护孔难题及其所采用的护孔新技术、新方法。  相似文献   

滇西北石鼓片岩变质变形特征及其划分   总被引：3，自引：0，他引：3  

李昆琼 《云南地质》2003,22(3):329-335

滇西北金沙江结合带东侧的石鼓变质岩系，可划分为石鼓岩群和巨甸岩群。石鼓岩群受区域动力热流变质作用改造，主期变形环境为中、深部构造相；巨甸岩群受区域低温动力变质作用改造，与之相伴的构造形迹属中、浅部构造相。石鼓岩群包含羊坡岩组和露西岩组，巨甸岩群可进一步划分为陇巴岩组和塔城岩组。同一岩群的岩组，变质作用、构造变形特征相同，但变质岩石组合及原岩特征却有明显差别。  相似文献   

Magnetic properties of a freshly fallen LL ordinary chondrite: the Bensour meteorite   总被引：1，自引：0，他引：1  

Jrme Gattacceca  Pierre Rochette  Michle Bourot-Denise 《Physics of the Earth and Planetary Interiors》2003,140(4):343-358

A comprehensive rock magnetic, magnetic anisotropy and paleomagnetic study has been undertaken in the brecciated LL6 Bensour ordinary chondrite, a few months only after its fall on Earth. Microscopic observations and electronic microprobe analyses indicate the presence of Ni-rich taenite, tetrataenite and rare Co-rich kamacite. Tetrataenite is the main carrier of remanence. Magnetization and anisotropy measurements were performed on mutually oriented 125 mm³ sub-samples. A very strong coherent susceptibility and remanence anisotropy is evidenced and interpreted as due to the large impact responsible for the post-metamorphic compaction of this brecciated material and disruption of the parent body. We show that the acquisition of remanent magnetization postdates metamorphism on the parent body and predates the entering of the meteorite in Earth’s atmosphere. Three components of magnetization could be isolated. A soft coherent component is closely related to the anisotropy of the meteorite and is interpreted as a shock remanent magnetization acquired during the same large impact on the parent body. Two harder components show random directions at a few mm scale. This randomness is attributed either to the formation mechanism of tetrataenite or to post-metamorphic brecciation. All components are likely acquired in very low (≈μT) to null ambient magnetic field, as demonstrated by comparison with demagnetization behavior of isothermal remanent magnetization. Two other LL6 meteorites, Kilabo and St-Mesmin, have also been studied for comparison with Bensour.  相似文献   

Temporal variations of shear-wave splitting in field and laboratory studies in China   总被引：1，自引：0，他引：1  

Yuan Gao  Stuart Crampin   《Journal of Applied Geophysics》2003,54(3-4):279

Observations of shear-wave splitting at seismic stations above a swarm of small earthquakes on Hainan Island, China, and other examples world-wide, suggest that the time-delays of split shear-waves monitor the build up of stress before earthquakes and the stress release as earthquakes occur. Rock physics experiments on marble specimens also show variations of shear-wave time-delays with uniaxial pressure analogous to the field observations. The rock experiments show an abrupt decrease in time-delays immediately before fracturing occurs. Similar precursory behaviour has been observed before earthquakes elsewhere, and is believed to be important for two reasons. Precursory changes in shear-wave splitting could be used for short-term forecasting, but of greater importance may be the information such behaviour provides about the source processes in earthquake preparation zones.  相似文献   

西南岩溶石山地区石漠化信息自动提取技术研究   总被引：34，自引：3，他引：34  

童立强 《国土资源遥感》2003,14(4):35-38

介绍了以TM数据为信息源,基于GIS系统平台的矢量化石漠化信息计算机自动提取原理、方法、步骤及提取效果。  相似文献   

应用RMi法估算岩体变形模量     

王亮清  胡静  章广成 《水文地质工程地质》2003,(Z1)

RMR法与Q法是国内外八、九十年代岩体质量和参数估算的常用方法,然而RMR法和Q法对质量较差的岩体不太实用,而RMi法是一种既适用于软岩又适用于硬岩的岩体质量评价和参数估算方法。本文在介绍RMi法基本原理的基础上,对贵州省鱼简河水库坝基岩体变形模量进行确定。  相似文献   

Geotechnical and geoenvironmental characteristics of man-made underground structures in Cappadocia, Turkey     

mer Aydan  Re at Ulusay 《Engineering Geology》2003,69(3-4):245-272

Underground cities and semi-underground settlements, most of which are 1500 years at least, exist in the Cappadocia Region of Turkey. These man-made rock structures are carved in soft tuffs and the best examples of long-term performance of man-made structures in the field of rock engineering. The tuffs also have good thermal isolation properties to be used as housing and storage of foods. In this article, the authors are only concerned with physical and short-term mechanical characteristics due to the wide-spectrum of the theme and the in situ characterization of the Cappadocia tuffs, and the results of investigations are presented. In addition, a critical overview on possible engineering geological problems at Cappadocia with mechanical aspects of historical and modern rock structures and their implications in rock engineering is made. From the experimental results in the field, it is evident that the engineering characteristics of these rocks do not show significant changes in vertical and horizontal directions. However, they are prone to atmospheric conditions. In addition, temperature and humidity measurements at different floors of the underground cities and various parts of semi-underground settlements indicated that variations in climatic conditions of the openings are very small when compared to those outside the ground surface.  相似文献   

Deformation at Stromboli volcano (Italy) revealed by rock mechanics and structural geology     

A Tibaldi  C Corazzato  T Apuani  A Cancelli 《Tectonophysics》2003,361(3-4):187-204

We approach the reconstruction of the recent structural evolution of Stromboli volcano (Italy) and the analysis of the interplay between tectonics, gravity and volcanic deformation. By tying together structural, lithostratigraphic and rock mechanics data, we establish that since 100 ka BP, the edifice has faulted and jointed mainly along NE-striking planes. Faults mostly dip to the NW with normal displacement. Taking also into account the presence of a NW-trending regional least principal stress and of tectonic earthquake hypocenters inside the cone, we suggest that this fracturing can be related to the transmission of tectonic forces from the basement to the cone. Dyking concentrated along a main NE-trending weakness zone (NEZ) across the volcano summit, resembling a volcanic rift, whose geometry is governed by the tectonic field. In the past 13 ka, Stromboli experienced a reorganisation of the strain field, which was linked with the development of four sector collapses affecting the NW flank, alternating with growth phases. The tectonic strain field interplayed with dyking and fracturing related to unbuttressing along the collapse shoulders. We propose that tectonics control the geometry of dykes inside the cone and that these, in turn, contribute to destabilise the cone flanks.  相似文献   

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy   总被引：1，自引：0，他引：1  

John Wheeler  Z. Jiang  D. J. Prior  J. Tullis  M. R. Drury  P. W. Trimby 《Tectonophysics》2003,376(1-2):19-35

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.  相似文献